SPECIALLY MANUFACTURED TO ANY DIMENSIONS

At Phoenix Steels, like the profiled sheeting all flashings and gutters can be made to order. However with flashings such as barge boards and ridge capping we keep a high stock  which are 200 x 200 wide.

All flashings are in lengths are 3.000m long as standard. Flashings can also have the option of having the edges welted where the edge of the flashing is completely turned back on itself. This is for safety as the edge of the sheet can be sharp but also to make it look better and give the flashing a bit more strength and stability.  Gutter prices vary on different sizes and gauges of material. A price can be given on request from one of our sales team. A guide of all the flashings that we have to follow is below and are available in our whole colour range.

We pride ouselves on be able to cater all our customers needs whether it be a simple 50mm x 50mm or 600mm x 600m. Or as many bends as the flashing needs to make it look as sharp as possible. These are last parts to go on the roof so its best to make sure they look right and finish the job well.

For prices on all our flashing’s please give our  friendly sales team a call on 01217070165. Each flashing is individual to each customer and will be manufactured to there unique requirements.

View our colour ranges here.

Head

Like a Drip Cill, the head flashing is fitted to divert water away from the wall cladding to stop any dampness. A Head also blocks the gap between the wall and the sheet. They are attached behind the sheet and then bend out away from the wall then return back. Head flashings are often used above doorways.

Custom dimensions amd angles are available upon request when ordered in advance. Prices differ upon dimensions of the flashing. All the flashings are safe edged (welted) to prevent any accidents when fitting the steel and to stiffen the edges up.

All head flashings are avalible in the wide range of colours and gauges that Phoenix Steels offers. This gives a fantastic finalised look to your building to finish it off.

 

Ridge

Ridge flashings are used on apex roofs where the roof cladding joins in the center on the building. This creates a clean cut finished look. Our most popular Ridge flashing is 200 x 200.

Custom dimensions and angles are available upon request when ordered in advance. Prices differ upon dimensions of the flashing. All the flashings are safe edged (welted) to prevent any accidents when fitting the steel and to stiffen the edges up.

All Ridge flashings are available in the wide range of colours and gauges that Phoenix Steels offers. This gives a fantastic finalised look to your building to finish it off.

 

Drip Cill

Drip cills are fitted to the lower part of wall cladding and are bent to an angle to direct any water that may occur away from the building.

Custom dimensions and angles are available upon request when ordered in advance. Prices differ upon dimensions of the flashing. All the flashings are safe edged (welted) to prevent any accidents when fitting the steel and to stiffen the edges up.

All Drip Cill flashings are avalible in the wide range of colours and gauges that Phoenix Steels offers. This gives a fantastic finalised look to your building to finish it off.

 

Barge

Barge boards are also used on the ends of apex roofs to shield the gap that would be present from the wind to avoid the sheets from lifting.

Custom dimensions and angles are available upon request when ordered in advance. Prices differ upon dimensions of the flashing. All the flashings are safe edged (welted) to prevent any accidents when fitting the steel and to stiffen the edges up.

All Barge flashings are avalible in the wide range of colours and gauges that Phoenix Steels offers. This gives a fantastic finalised look to your building to finish it off.

 

Corner/ Jamb

Corner flashings are essentially the same as barge board flashing but instead of the flashing being horizontal the capping is vertical. Corner flashings cap the corners of the cladding run. Jambs are another form of corner flashings.

Custom dimensions and angles are avalible upon request when ordered in advance. Prices differ upon dimensions of the flashing. All the flashings are safe edged (welted) to prevent any accidents when fitting the steel and to stiffen the edges up.

All Corner flashings are available in the wide range of colours and gauges that Phoenix Steels offers. This gives a fantastic finalised look to your building to finish it off.

 

Abutment (Apron)

Abutment’s are used when steel sheets finish against a wall to seal the trim. The welts are on the reverse side to barge boards. Abutments are used vertically rather than horizontally. These are essentially internal corner flashings.

Custom dimensions and angles are available upon request when ordered in advance. Prices differ upon dimensions of the flashing. All the flashings are safe edged (welted) to prevent any accidents when fitting the steel and to stiffen the edges up.

All Abutment flashings are available in the wide range of colours and gauges that Phoenix Steels offers. This gives a fantastic finalised look to your building to finish it off.

Eaves

Eaves are often used as a decorative flashing to create a finished look on a building and are located at the end of the run of cladding.

Custom dimensions and angles are available upon request when ordered in advance. Prices differ upon dimensions of the flashing.  All the flashings are safe edged (welted) to prevent any accidents when fitting the steel and to stiffen the edges up.

All Eaves flashings are available in the wide range of colours and gauges that Phoenix Steels offers. This gives a fantastic finalised look to your building to finish it off.

 

Valley

Valley flashings are used when two pitched roofs meet and form a valley. The valley system at Phoenix Steels can be offered in multiple sections with a capping over the top for a decorative finish. This is sometimes known as a leaf guard system.

Custom dimensions and angles are available upon request when ordered in advance. Prices differ upon dimensions of the flashing. All the flashings are safe edged (welted) to prevent any accidents when fitting the steel and to stiffen the edges up.

All Valley flashings are available in the wide range of colours and gauges that Phoenix Steels offers. This gives a fantastic finalised look to your building to finish it off.

 

Gutters

Phoenix Steels gutters are made to measure to your building. The gutters direct the water-flow away from the building to stop any leakage in to the building.

Custom dimensions and angles are available upon request when ordered in advance. Prices differ upon dimensions of the flashing. All the flashings are safe edged (welted) to prevent any accidents when fitting the steel and to stiffen the edges up.

All Gutters are available in the wide range of colours and gauges that Phoenix Steels offers. This gives a fantastic finalised look to your building to finish it off.